Zp18c Glass Bottle/Vial Blowing Machine
1. The linear guide instead of dovetail groove in the bottle fabricating group is a revolutionary breakthrough.
2. The sliding system was changed as the linear bearing instead of the doventail groove in Part B the clamped group for fabricating the bottom of the bottle, and overcame many difficult such as the loose, the wear, easy to get stuck and difficult to maintenance for the dovetail groove.
3. The drill chuck type in Part can fine-tune their concentricity.
4. The third generation anti-mounted torsion spring-type chuck in Part B.
5. The power from the dual synchronous motor box replace the original turbo tank, eliminate the vibration between plate A and B, the spills of oil and maintenance problems, thoroughly.
6. The holding tube system promotes the rate of finished products and reduces the workload of the workers.
7. The clip in Part B is a measure for avoiding the oil pollution for finished bottle.
8. The modulated cervical vertical-shaft and fine-tune neutral point for the movement in the machine. Because of the deficiencies in the original model, it can't achieve these functions.
9. The GCr15 bearing steel intermittent cams do not always repair, with long life.
10. The transmission was improved as the alloying spiral bevel gear instead of straight bevel gear alloy, greatly increasing its service life and reducing the noise.